Removal Procedure
- Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection
Release the retaining tab.
- Power Distributor Fuse Block Cover (1) - Remove
Disconnect the electrical connector.
- Body Front Wiring Harness Nut (1) - Remove [5x]
- Engine Wiring Harness Fuse Block Nut (2) - Remove [2x]
- Battery Positive Cable Junction Block Nut (3) - Remove [2x]
- Battery Negative Post Clamp Nut (4) - Loosen until disengaged
- Position wiring harness terminals aside.
- Battery Distribution Engine Compartment Fuse Block (5) - Remove