Removal Procedure

Courtesy of GENERAL MOTORS COMPANY

Front Side Door Pull Cup Liner (1) - Remove
Front Side Door Armrest Pull Cup Bolt (2) - Remove [2x]
Courtesy of GENERAL MOTORS COMPANY

Front Side Door Trim Panel Bolt (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Using an appropriate tool, start from the rear bottom corner and pull the front side door trim (1) from the sheet metal towards you to disengage perimeter retainers.
When the front side door trim (1) is sufficiently loosened, place an appropriate tool at the rear portion of the door trim to disengage the remaining retainers and clip.
Unhook the front side door trim (1) from the belt line, pulling the door trim upwards using both hands.
Disconnect the door lock retainer cable from the front side door trim (1) and the inside handle.
Disconnect the electrical connector.
Front Side Door Trim (1) - Remove
Place the front side door trim (1) on a clean flat surface.
Courtesy of GENERAL MOTORS COMPANY

Disconnect the electrical connector (1).
Courtesy of GENERAL MOTORS COMPANY

Liftgate Release Switch - Interior (1) - Remove