Circuit/System Verification
- Verify DTC P2E35 or P2E36 is not set with DTC P2E37.
- If DTC P2E37 is not set and other DTCs are set
Refer to: Circuit/System Testing
- Go to next step: If DTC P2E37 is set
Go to next step: Verify the vehicle is equipped with dual battery charger modules using either visual inspection or RPO verification.
- If the vehicle is equipped with dual battery charger modules, - Refer to: Circuit/System Testing
- If the vehicle is equipped with a single battery charger module, - Replace: Battery Energy Control Module
- If none of the DTCs are set
- If DTC P2E37 is not set and other DTCs are set
- All OK.