Installation Procedure
Trailer Lamp Control Module (1) - Install
- Trailer Lamp Control Module Bracket Nut (2) - Install and tighten [2x] - Fastener Specifications
- Connect the electrical connector. (3)
Rear Wheelhouse Panel Rear Liner- Left Side (3) - Install - Rear Wheelhouse Panel Rear Liner Replacement
- Install the left rear tire and wheel assembly. Tire and Wheel Removal and Installation
- Connect the battery negative cable. Battery Negative Cable Disconnection and Connection
- The K68 trailer lamp control module does not require programming, but does require serial data authentication. Refer to: K68 Trailer Lighting Control Module: Programming and Setup
CAUTION: