LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2024 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 198 (Driver Assistance Systems) >> Diagnostic Information and Procedures >> DTC B101E (B218L Side Object Sensor Module - Left or B218R Side Object Sensor Module - Right) >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2020 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition - On / Vehicle - In Service Mode
  2. Verify DTC B101E is not set.
    • If the DTC is set 

      Replace the appropriate component: B218L Side Object Sensor Module - Left or B218R Side Object Sensor Module - Right

    1. Program the appropriate control module: B218L Side Object Sensor Module - Left or B218R Side Object Sensor Module - Right
    2. Ignition - On / Vehicle - In Service Mode
    3. Verify DTC B101D is not set.
      • If the DTC is set

        Replace the appropriate component: B218L Side Object Sensor Module - Left or B218R Side Object Sensor Module - Right

      • Go to next step: If the DTC is not set
    4. All OK.
    • Go to next step: If the DTC is not set 
  3. All OK.
scientia non olet · About LEMON Manuals