Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Apply a light coat of wheel speed anti-corrosion grease to the front wheel speed sensor (1) and mounting pad on the steering knuckle. Adhesives, Fluids, Lubricants, and Sealers
Front Wheel Speed Sensor (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Front Wheel Speed Sensor Bolt (1) - Install and tighten 9 N.m (80 lb in)
Courtesy of GENERAL MOTORS COMPANY

Connect the electrical connector and install the wiring harness retainers as necessary. (1)
Front Wheelhouse Liner - Install
- Front Wheelhouse Liner Replacement - Left Side (Equinox) , or Front Wheelhouse Liner Replacement - Left Side (Terrain)
- Front Wheelhouse Liner Replacement - Right Side (Equinox)