LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2024 >> Corvette Z06, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 96 (Programming And Setup (E-Ray)) >> Repair Instructions >> K160 Brake System Control Module: Programming and Setup >> Programming an Existing or New Control Module

Programming an Existing or New Control Module

WARNING: This page is about a different variant/trim than selected.

To program an existing or new control module, perform the following procedure:

  1. Ignition/Vehicle OFF, ensure that the key fob is inside the vehicle and not moved for the duration of the programming.
  2. Access the Service Programming System (SPS) and follow the on-screen instructions for the K160 Brake System Control Module.
  3. Perform the SPS function: Prepare Control Module for Removal  and follow the on-screen instructions.
  4. Perform the SPS function: Programming  and follow the on-screen instructions.
  5. Perform the SPS function: Setup  and follow the on-screen instructions.
  6. Clear DTCs.
scientia non olet · About LEMON Manuals