LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2024 >> Corvette Z06, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 96 (Programming And Setup (E-Ray)) >> Repair Instructions >> K157 Video Processing Module: Programming and Setup >> Reprogram Control Module

Reprogram Control Module

WARNING: This page is about a different variant/trim than selected.

To program a replacement or an existing control module, perform the following procedure:

  1. Ignition/Vehicle OFF.
  2. Access the Service Programming System (SPS) and follow the on-screen instructions.
  3. On the SPS Supported Controllers screen, select K157 Video Processing Control Module - Programming and follow the on-screen instructions.
  4. Clear DTCs.
  5. Calibrate Vehicle Processing Control Module. Refer to: Surround Vision Camera Calibration
scientia non olet · About LEMON Manuals