LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2024 >> Corvette Z06, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 48 (Remote Functions (E-Ray)) >> Diagnostic Information and Procedures >> DTC B1ADF >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different variant/trim than selected.
  1. Perform the Programming and Setup procedure for the control module that set the DTC.
  2. Verify the DTC does not set after programming.
    • If the DTC sets after programming 

      Replace the control module that set the DTC.

    • Go to next step: If the DTC does not set after programming 
  3. All OK.
scientia non olet · About LEMON Manuals