LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2024 >> Corvette E-Ray, 2D Convertible >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System (All Models) >> Diagnostic Information and Procedures >> DTC C2A1C >> Circuit/System Verification

Circuit/System Verification

  1. Ignition - On / Vehicle - In Service Mode
  2. Perform the configuration/reset function: Brake System Plunger Motor Position Sensor Learn
  3. Verify DTC C2A1C is not set
    • If the DTC sets 

      Replace the component: K160 Brake System Control Module

    • Go to next step: If the DTC is not set 
  4. All OK.
scientia non olet · About LEMON Manuals