Fastener Specifications
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| 1. Automatic Transmission Fluid Cooling Heat Exchanger Inlet Pipe Seal |
| 2. Automatic Transmission Fluid Cooling Heat Exchanger Outlet Pipe Seal |
| 3. Automatic Transmission Fluid Cooling Heat Exchanger Outlet Pipe Tie Strap |
| 4. Sealing Washer |
| 5. Transmission Fluid Cooler Pipe Fitting Seal |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Automatic Transmission Fluid Cooling Exchanger Bolt | 9 N.m (80 lb in) |
| Automatic Transmission Fluid Cooling Heat Exchanger Inlet Pipe Bolt | 9 N.m (80 lb in) |
| Automatic Transmission Fluid Cooling Heat Exchanger Inlet Pipe Nut | 22 N.m (16 lb ft) |
| Automatic Transmission Fluid Cooling Heat Exchanger Outlet Pipe Nut | 22 N.m (16 lb ft) |
| Transmission Fluid Auxiliary Cooler Bolt | 3 N.m (27 lb in) |
| Transmission Fluid Cooler Pipe Nut | 22 N.m (16 lb ft) |
| Transmission Fluid Cooler Thermal Bypass Valve Bolt | 3 N.m (27 lb in) |