Fastener Specifications
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| 1. Power Transfer Unit Cover Housing Seal |
| 2. Power Transfer Unit Face Seal |
| 3. Power Transfer Unit Half Shaft Seal |
| 4. Power Transfer Unit Input Shaft Seal |
| 5. Power Transfer Unit Intermediate Drive Shaft Seal |
| 6. Power Transfer Unit Output Shaft Seal |
| 7. Power Transfer Unit Intermediate Drive Shaft Retainer |
| 8. Power Transfer Unit Propeller Shaft Seal |
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Power Transfer Unit Drain Plug | 40 N.m (30 lb ft) |
| Power Transfer Unit Fill Plug | 40 N.m (30 lb ft) |
| Power Transfer Unit Extension Housing Bolt | 38.5 N.m (28 lb ft) |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Power Transfer Unit Heat Shield Bolt | 9 N.m (80 lb in) |
| Power Transfer Unit Shift Actuator Bolt | 9 N.m (80 lb in) |
| Power Transfer Unit Shift Actuator Bolt- Double End Stud | 9 N.m (80 lb in) |
| Power Transfer Unit Vent Hose Connector | 20 N.m (15 lb ft) |