Installation Procedure
WARNING: This page is about a different car, the 2021 Chevrolet Tahoe and 2021 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
Video Display Inside Rearview Mirror Camera (3) - Install
- Rearview Driver Information Camera Bracket (2) - Install
- Rearview Driver Information Camera Bracket Bolt (1) - Install and tighten [2x] - Fastener Specifications
Rear Closure Center Applique (2) - Install
- Rear Closure Center Applique Nut (1) - Install and tighten [10x] - Fastener Specifications
- Connect the washer hose, If equipped.
- Connect all electrical connectors.
Rear Closure Center Applique Bolt (1) - Install and tighten [6x] - Fastener Specifications
- Liftgate Side Sensor - Install [2x]
- Connect the electrical connector.
Connect the electrical connector.
- Liftgate Lower Trim Finish Panel (3) - Install
- Liftgate Lower Trim Finish Panel Bolt (2) - Install and tighten - Fastener Specifications
- Rear Compartment Lid Inner Panel Trim Hole Plug (1) - Install
Liftgate Upper Side Trim Finish Panel (1) - Install [2x]
Liftgate Upper Center Trim Finish Panel (1) - Install
Liftgate Lower Trim Finish Panel Access Hole Cover (2) - Install
- Liftgate Trim Finish Panel Locator (1) - Install [2x]
- Close the liftgate window.
CAUTION:
Refer to Fastener Caution .