LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2022 >> Tahoe SSV >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (Antilock Brake System) >> Diagnostic Information and Procedures >> Traction Control/Stability Control Indicator Malfunction >> Component Testing

Component Testing

WARNING: This page is about a different car, the 2021 Chevrolet Tahoe and 2021 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the harness connector at the S86 Vehicle Stability Control System Switch.
  2. Test for infinite resistance between the signal terminal 1 and the ground terminal 10 with the switch in the open position.
    • If less than infinite resistance 

      Replace the S86 Vehicle Stability Control System Switch.

    • Go to next step: If infinite resistance 
  3. Test for less than 2 Ω between the signal circuit terminal 1 and the ground terminal 10 with the switch in the closed position.
    • If 2 Ω or greater 

      Replace the S86 Vehicle Stability Control System Switch.

    • Go to next step: If less than 2 Ω 
  4. All OK.
scientia non olet · About LEMON Manuals