Removal Procedure
WARNING: This page is about a different car, the 2021 Chevrolet Tahoe and 2021 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
- Spare Wheel - Remove
- Raise and support the vehicle. Lifting and Jacking the Vehicle
If equipped, disconnect the trailer brake control module wire harness connector (1).
- Disconnect the electronic suspension control module wire harness connector (2).
Electronic Suspension Control Module Bracket Bolt (1) - Remove [2x]
- The electronic suspension control module bracket nuts and studs are part of the bracket.
- Turn the stud right to loosen.
- Loosen the 2 electronic suspension control module bracket studs (2).
Remove the electronic suspension control module bracket (1) from the keyhole slot at the frame.
Electronic Suspension Control Module Bracket Nut (1) - Remove [4x]
- Electronic Suspension Control Module (2) - Remove
NOTE: