Removal Procedure
WARNING: This page is about a different car, the 2021 Chevrolet Tahoe and 2021 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- NOTE:
Right side shown, left side similar.
Disconnect the front suspension 4 corner leveling system position sensor link (2) from the electronic suspension front position sensor link ball stud (1).
- Disconnect the electrical connector (3).
- Loosen the front suspension 4 corner leveling system position sensor (4).
Remove the front suspension 4 corner leveling system position sensor (1) from the keyhole slot at the frame.
NOTE:
Right side shown, left side similar.
NOTE:
The front suspension 4 corner leveling system position sensor nut and stud are part of the sensor.