Installation Procedure

WARNING: This page is about a different car, the 2021 Chevrolet Tahoe and 2021 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Brake Pedal Position Sensor (2) - Install

CAUTION:

Refer to Fastener Caution .

Brake Pedal Position Sensor Bolt (1) - Install and tighten - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Brake Pedal Position Sensor Electrical Connector (1) - Connect
Courtesy of GENERAL MOTORS COMPANY

Body Control Module (1) - Install
Secure the retaining tabs.
Connect the electrical connectors.
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Lower Trim Panel Insulator (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Lower Insulator Retainer (1) - Install [2x]
Calibrate the brake pedal position sensor. Brake Pedal Position Sensor Calibration