Removal Procedure
WARNING: This page is about a different car, the 2021 Chevrolet Tahoe and 2021 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Refer to SIR Warning .
WARNING:
WARNING:
Following the deployment of a side impact air bag, inspect the following parts for damage. Replace these parts if necessary:
- The seat cushion frame
- The seat recliner, if equipped
- The seat adjuster
- The seat back frame
Failure to do so may cause future personal injury.
- Disable the SIR system. SIR Disabling and Enabling
- Front Bumper Fascia - Remove - Front Bumper Fascia Removal and Installation (with RC1)Front Bumper Fascia Removal and Installation (with WTX)
- NOTE:
- Integral sensor assembly bolt uses Left Hand threads. Use counterclockwise rotation to loosen fastener at TORX® tip end. If accessing at pan head end of the fastener, use clockwise rotation to loosen bolt.
- The bolts are integral to the sensor, DO NOT remove separately.
Loosen the fastener and slide the sensor out of the keyhole slot.
- Disconnect the electrical connector.
- Airbag Front End Discriminating Sensor(1) - Remove