Removal Procedure
WARNING: This page is about a different car, the 2021 Chevrolet Tahoe and 2021 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
Using a flat-bladed plastic trim tool, release the retaining clips.
- Front Floor Console Lower Applique (1) - Remove
Using a flat-bladed plastic trim tool, release the retaining clips.
- Front Floor Console Applique (1) - Remove
Using a flat-bladed plastic trim tool, release the retaining clips.
- Front Floor Console Lower Applique (1) - Remove
Using a flat-bladed plastic trim tool, release the retaining clips.
- Front Floor Console Applique (1) - Remove
Using a suitable plastic trim tool, release the retaining tabs.
- Front Floor Rear Console Side Trim Panel (1) - Remove
Pull up on the rear of the front floor console cup holder trim plate (1) to start to release the retainer clips and work your way forward.
- Disconnect the electrical connectors.
- Front Floor Console Cup Holder Trim Plate (1) - Remove
Wireless Charging System Module Bracket Bolt (1) - Remove [4x]
- Wireless Charging System Module (2) - Remove