Installation Procedure
WARNING: This page is about a different car, the 2020 Chevrolet Silverado 1500. However, it is still accessible from the selected car via links, so may be relevant.
Side Object Sensing Alert Module (2) - Install
- Side Object Sensing Alert Module Bolt (1) - Install and tighten - Fastener Specifications
Connect the electrical connector.
- Rear Bumper Impact Bar Bracket - Side Object Sensing Alert Module (2) - Install
- Rear Bumper Impact Bar Bracket Bolt - Side Object Sensing Alert Module (1) - Install and tighten [2x] - Fastener Specifications
- Lower the vehicle.
- Perform the necessary programming and setup procedure: Control Module References
CAUTION:
Refer to Fastener Caution .