Installation Procedure
WARNING: This page is about a different car, the 2020 Chevrolet Silverado 1500. However, it is still accessible from the selected car via links, so may be relevant.
Install the side obstacle detection control module (2) to the side object sensing alert module bracket (3).
- Side Object Sensing Alert Module Bolt (1) - Install and tighten - Fastener Specifications
Connect the electrical connector.
- Side Object Sensing Alert Module Bracket (2) - Install
- Rear Bumper Impact Bar Bolt (1) - Install and tighten [2x] - Fastener Specifications
- Lower the vehicle.
CAUTION:
Refer to Fastener Caution .