Installation Procedure
WARNING: This page is about a different car, the 2020 Chevrolet Silverado 1500. However, it is still accessible from the selected car via links, so may be relevant.
Install the front view driver information camera bracket (1) to the windshield and slide downward to engage the pins.
Connect the electrical connector.
- Front View Camera (1) - Install
- Secure the retaining tabs.
Install the windshield multifunction sensor mount bracket cover (1) ensuring the retaining tabs are fully seated.
Windshield Multifunction Sensor Mount Bracket Cover Insert (1) - Install
- Apply pressure upward on the windshield multifunction sensor mount bracket cover insert (1) to engage the retaining tabs.
- Perform the necessary programming and setup procedure: Control Module References