Removal Procedure
WARNING: This page is about a different car, the 2020 Chevrolet Silverado 1500. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- Spare Tire - Remove
Disconnect the electrical connector.
- Electronic Suspension Control Module Bracket Bolt (1) - Loosen [2x]
- Electronic Suspension Control Module Bracket (2) - Remove
Electronic Suspension Control Module Bracket Nut (1) - Remove [3x]
- Electronic Suspension Control Module (2) @Electronic Suspension Control Module Bracket (3) - Remove