Installation Procedure
WARNING: This page is about a different car, the 2020 Chevrolet Silverado 1500. However, it is still accessible from the selected car via links, so may be relevant.
Electronic Suspension Control Module (2) @Electronic Suspension Control Module Bracket (3) - Install
- Electronic Suspension Control Module Bracket Nut (1) - Install and tighten [3x] - Fastener Specifications
Electronic Suspension Control Module Bracket (2) - Install
- Electronic Suspension Control Module Bracket Bolt (1) - Tighten [2x] - Fastener Specifications
- Connect the electrical connector.
- Spare Tire - Install
- Remove the support and lower the vehicle.
- Perform the necessary programming and setup procedure: Control Module References
CAUTION:
Refer to Fastener Caution .