Removal Procedure
WARNING: This page is about a different car, the 2020 Chevrolet Silverado 1500. However, it is still accessible from the selected car via links, so may be relevant.
Pull away a segment of the front side door weatherstrip to clear the edge of the cover.
- Using a flat-bladed plastic trim tool, release the retaining clips.
- Start at the back and work your way inboard to release the tabs.
- Instrument Panel Fuse Block Access Hole Cover (1) - Remove
Instrument Panel Trim Pad Bolt (1) - Remove [2x]
- Instrument Panel Trim Pad (2) - Remove
- Disconnect all electrical connectors.
Release the retaining tabs.
- Ride Control Switch (1) - Remove