Installation Procedure
WARNING: This page is about a different car, the 2020 Chevrolet Silverado 1500. However, it is still accessible from the selected car via links, so may be relevant.
Ride Control Switch (1) - Install
- Secure the retaining tabs.
Connect all electrical connectors.
- Instrument Panel Trim Pad (2) - Install
- Instrument Panel Trim Pad Bolt (1) - Install and tighten [2x] - Fastener Specifications
Instrument Panel Fuse Block Access Hole Cover (1) - Install
- Replace the front side door weatherstrip to cover the edge of the cover.
CAUTION:
Refer to Fastener Caution .