Component Testing
WARNING: This page is about a different car, the 2020 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition/Vehicle - Off
- Disconnect the appropriate electrical connector: A23LR Rear Side Door Latch - Leftor A23RR Rear Side Door Latch - Right
- Connect a 25 A fused jumper wire between the test points: Control terminal 8 & B+
- Momentarily connect a jumper wire between the test points:
- A23LR Rear Side Door Latch - Left:Control terminal 9 & Ground
- A23RR Rear Side Door Latch - Right:Control terminal 7 & Ground
- Reverse the jumper wires 2 times between the terminals.
Verify the component works as specified: A23 Door Latch Assembly = Lock & Unlock
- If not the specified state
Replace the component:A23LR Rear Side Door Latch - Leftor A23RR Rear Side Door Latch - Right
- Go to next step: If the specified state
- If not the specified state
- All OK.
CAUTION:
Complete the testing as quickly as possible in order to prevent overheating and damaging the component.