Circuit/System Verification
- Ignition ON.
- Verify the Instrument Cluster ABS Indicator turns On and Off when commanding the All Indicators On and Off with a scan tool.
- If the ABS indicator does not turn On and Off
Replace the P16 Instrument Cluster.
- Go to next step: If the ABS indicator turns On and Off
- If the ABS indicator does not turn On and Off
- Verify the ABS Indicator turns Off five seconds after the ignition is turned On.
- If the ABS indicator does not turn Off
Replace the K17 Electronic Brake Control Module.
- Go to next step: If the ABS indicator turns Off
- If the ABS indicator does not turn Off
- All OK.