LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2021 >> Traverse L >> Repair and Diagnosis >> Electrical >> Body Electrical >> Wire And Connector Repair >> Repair Instructions >> Sumitomo Connectors >> Terminal Insertion Procedure

Terminal Insertion Procedure

After the terminal is replaced, perform the following procedure in order to insert the terminal.

  1. Slide the new terminal into the correct cavity at the back of the connector.
  2. Push the terminal into the connector until it locks into place. The new terminal should be even with the other terminals. Ensure that the terminal is locked in place by gently pulling on the wire.
  3. To assemble the connector, reverse the connector disassembly procedure.
scientia non olet · About LEMON Manuals