LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2021 >> Traverse L >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Driver Assistance Systems >> Diagnostic Information and Procedures >> DTC B101E (K124 Active Safety Control Module) >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON/Vehicle In Service Mode.
  2. Verify DTC B101E is not set.
    • If DTC B101E is set 
    1. Program the K124 Active Safety Control Module.
    2. Verify the DTC does not set.
      • If the DTC sets, replace the K124 Active Safety Control Module.
      • Go to next step: If the DTC does not set
    3. All OK.
    • Go to next step: If DTC B101E is not set 
  3. All OK
scientia non olet · About LEMON Manuals