LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2021 >> Trailblazer L >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Wheel And Column >> Repair Instructions >> Steering Wheel Replacement >> Installation Procedure

Installation Procedure

  1. Connect the electrical connector.
  2. GM5171370Courtesy of GENERAL MOTORS COMPANY

    Install the steering wheel. (1)

  3. GM5171369Courtesy of GENERAL MOTORS COMPANY

    If a NEW threaded component is being installed, loosen the adhesive using a metal pick or similar tool before proceeding. If threaded component is reused, prepare the threaded component using the following steps:

    1. Remove any loose cured adhesive from the external threads of the component using a lint free cloth.
    2. Thread the cleaned component into the internal mating threads and remove to loosen trapped cured adhesive. (1)
    3. Apply thread locking adhesive to the external threads of the component. (1) Adhesives, Fluids, Lubricants, and Sealers 
    4. Ensure there are no gaps in the thread locking adhesive once applied to the component.
    4. CAUTION:

    Fastener Caution .

  4. Steering Wheel Bolt (1) - Install and tighten 45 N.m (33 lb ft)
  5. Steering Wheel Airbag - Install - Steering Wheel Airbag Replacement
scientia non olet · About LEMON Manuals