Front Seat Belt Retractor Replacement

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
WARNING: SIR Warning Preliminary Procedure Disable the supplement inflatable restraint (SIR) system. SIR Disabling and Enabling Center Pillar Upper Trim Panel Replacement Center Pillar Lower Trim Panel Replacement Front Seat Belt Anchor Plate Tensioner Cover Replacement
1	Front Seat Belt Anchor Plate Tensioner Bolt CAUTION: Fastener Caution Tighten 5 N.m (44 lb in)
2	Front Seat Belt Retractor Fastener [2x] CAUTION: Fastener Caution NOTE: When the seat belt retractor is replaced with a new one, there is no thread in the nut welded in the body. This is normal as the bolt will make the thread in the welded nut when the bolt is tightened. NOTE: Self cutting bolts, prevailing nuts must be replaced if loosened. Tighten 45 N.m (33 lb ft)
3	Front Seat Belt Retractor Bolt [2x] Tighten 9 N.m (80 lb in)
4	Front Seat Belt Retractor Procedure Disconnect the electrical connector. Enable the supplement inflatable restraint (SIR) system. SIR Disabling and Enabling