Component Testing
- Ignition OFF, disconnect the harness connector at the B55 Hood Ajar Switch.
- Test for 2080 - 2545 Ω between the signal terminal B and the ground terminal C with the hood latch in the closed position.
- If not between 2080 - 2545 Ω
Replace the B55 Hood Ajar Switch.
- Go to next step: If between 2080 - 2545 Ω
- If not between 2080 - 2545 Ω
- Test for 658 - 806 Ω between the signal terminal B and the ground terminal C with the hood latch in the open position.
- If not between 658 - 806 Ω
Replace the B55 Hood Ajar Switch.
- Go to next step: If between 658 - 806 Ω
- If not between 658 - 806 Ω
- All OK.