Removal Procedure
CAUTION:
Use care when working around the head curtain inflator module. Sharp tools may puncture the curtain airbag. If the head curtain inflator module is damaged in any way, it must be replaced.
Move the front seat fully forward.
- Use a flat bladed plastic tool between the center pillar center trim panel (1) and the center pillar upper trim panel to disengage the upper retaining clips (2).
- Pull from both sides of the center trim panel to release the middle and lower retaining clips (2).
- Center Pillar Center Trim Panel (1) - Remove
Center Pillar Upper Trim Panel Bolt Cap (1) - Remove
- Center Pillar Upper Garnish Molding Bolt (2) - Remove
- Pull the trim panel (3) toward the inside of the vehicle to disengage the retaining clips.
- Center Pillar Upper Trim Panel (3) - Reposition
Front Seat Belt Retractor D Ring Bolt (1) - Remove
Front Seat Belt Adjust Bolt (1) - Remove [2x]
- Front Seat Belt Guide Adjuster (2) - Remove