Removal Procedure
3rd Row Seat (2) - Remove - 3rd Row Seat Removal and Installation
- Disable the SIR system. SIR Disabling and Enabling
Using a flat-bladed plastic trim tool, release the retaining clips.
- Rear Side Door Sill Garnish Molding (1) - Remove
Place the rear seat (1) in the fold and tumble position.
Liftgate Weatherstrip (1) - Reposition
Liftgate Lock Striker Cover (1) - Remove
Using a flat-bladed plastic trim tool, release the retaining clips.
- Rear End Trim Finish Panel (1) - Remove
Rear Seat Belt Retractor Sleeve (1) - Reposition
- Rear Seat Belt Anchor Plate Bolt (2) - Remove
Rear Seat Belt Opening Bezel (1) - Disengage
Quarter Window Trim Finish Panel Bolt Cap (1) - Remove
- Quarter Window Trim Finish Panel Bolt (2) - Remove
Using a flat-bladed plastic trim tool, release the retaining clips.
- Body Lock Pillar Upper Trim Panel (1) - Remove
Using a flat-bladed plastic trim tool, release the retaining clips.
- Pull the body side rear window garnish molding (1) outwards enough to access the tether fastener.
Body Side Rear Window Garnish Molding Bolt (1) - Remove
- Body Side Rear Window Garnish Molding Tether Retaining Clip (2) - Remove
Body Rear Corner Upper Garnish Molding Bolt (1) - Remove
Using a flat-bladed plastic trim tool, release the retaining clips.
- Body Rear Corner Upper Garnish Molding (1) - Remove
Electrical Connector (1) - Disconnect
- Wiring Harness Retainer (2) - Remove
3rd Row Seat Belt Anchor Bolt (1) - Remove
Using a flat-bladed plastic trim tool, release the retaining clips.
- Rear Seat Belt Opening Bezel (1) - Remove
3rd Row Seat Belt Retractor Anchor Cover (1) - Open
- 3rd Row Seat Belt Guide Bolt (2) - Remove
Convenience Net Retainer (1) - Remove
- Cargo Tie Down Loop Bolt Cap (2) - Open
- Cargo Tie Down Loop Bolt (3) - Remove
- Cargo Tie Down Loop (4) - Remove
Using a flat-bladed plastic trim tool, release the retaining clips.
- If equipped, disconnect the electrical connectors and wiring harness retainers.
- Quarter Lower Rear Trim Panel (1) - Remove
3rd Row Seat Belt Retractor Bolt (1) - Remove
- 3rd Row Seat Belt Retractor (2) - Remove
Feed the rear seat belt opening bezel and rear seat belt through the body lock upper trim panel.
Feed the rear seat belt opening bezel and 3rd row seat belt through the quarter lower rear trim panel.