Removal Procedure
Using a flat-bladed plastic trim tool, release the retaining clips.
- Roof Console Opening Trim Plate (1) - Remove
- Roof Console Bolt (2) - Remove [2x]
- Roof Console (3) - Remove
- Disconnect the electrical connectors.
{with UTV} Reposition the content theft deterrent sensor:
- Release the retaining tabs.
- Content Theft Deterrent Sensor (1) - Reposition
Roof Console Bracket Bolt (1) - Remove [2x]
- Roof Console Bracket Bolt (2) - Remove [2x]
- Theft Intrusion Bracket (3) - Reposition
Garage Door Opener Transmitter Bolt (1) - Remove [2x]
- Garage Door Opener Transmitter (2) - Remove
- Disconnect the electrical connectors.