LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2021 >> Silverado 1500 SSV, RWD, Gas >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Remote Functions >> Repair Instructions >> Remote Function Actuator Module Replacement (Regular Cab) >> Installation Procedure

Installation Procedure

GM5161805Courtesy of GENERAL MOTORS COMPANY
  1. Remote Function Actuator Module (1) - Install
  2. Secure the retaining tabs.
  3. Connect the electrical connector.
    GM5163264Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Left side shown, right side similar.

  4. Ensure the right side seat belt webbing in not caught by panel clip tower and is in front of it.
  5. Body Lock Pillar Garnish Molding-Right Side (3) - Install
    CAUTION:

    Refer to Fastener Caution .

  6. Body Lock Pillar Garnish Molding Bolt - Right Side (2) - Install and tighten - Fastener Specifications
  7. Center Pillar Upper Trim Panel Bolt Cap-Right Side (1) - Install
    GM5035139Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Left side shown, right side similar.

  8. Front Seat Belt Anchor Plate Tensioner Bolt-Right Side (2) - Install and tighten - Fastener Specifications

  9. Front Seat Belt Anchor Plate Tensioner Cover-Right Side (1) - Install
    GM5158756Courtesy of GENERAL MOTORS COMPANY
  10. Rear Window Lower Garnish Molding-Right Side (1) - Install
  11. Install the front center seat. Front Center Seat Removal and Installation
  12. Enable the SIR System. SIR Disabling and Enabling
scientia non olet · About LEMON Manuals