Removal Procedure
- Relieve the fuel system pressure. Fuel Pressure Relief
Fuel Pump Insulator (1) - Remove - Fuel Pump Insulator Replacement
- CAUTION:
Refer to Fuel and Evaporative Emission Hose/Pipe Connection Cleaning Caution .
NOTE:- Applying force to the plastic housing of the sensor may damage the sensor. To tighten or loosen, apply force only to the attached hexagon.
- Some fuel may leak from the fuel injection fuel rail fuel pressure sensor orifice after the sensor is removed. Dry the area around this orifice after the removal of the sensor using a lint free cloth and inspect the fuel injection fuel rail fuel pressure sensor sealing surface. The surface should be free of fuel, debris, and burrs.
Disconnect the electrical connector.
- Fuel Injection Fuel Rail Fuel Pressure Sensor (1) - Remove