Removal Procedure
WARNING:
Refer to Brake Dust Warning .
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- Remove the tire and wheel assembly. Tire and Wheel Removal and Installation (Without Dual Rear Wheels) , or Tire and Wheel Removal and Installation (With Dual Rear Wheels)
Front Brake Rotor (1) - Remove - Front Brake Rotor Replacement (JH6) , or Front Brake Rotor Replacement (JH9)
Electrical Connector (1) - Disconnect
Clip (1) - Release
Clip (1) - Release
Clip (1) - Release
Wheel Speed Sensor Bolt (1) - Remove
- CAUTION:
Carefully remove the sensor by pulling it straight out of the bore. DO NOT use a screwdriver, or other device. Prying will cause the sensor body to break off in the bore.
Wheel Speed Sensor (1) - Remove