Windshield Wiper System Module Replacement

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Air Inlet Grille Panel - Left Side - Remove - Air Inlet Grille Panel Replacement (Left Side)
1	Windshield Wiper System Module Bolt [4x] CAUTION: Refer to Fastener Caution . Tighten 8 N.m (71 lb in)
2	Windshield Wiper System Module Procedure Disconnect the electrical connector. Remove the windshield wiper system module from the plenum brackets. NOTE: The windshield wiper transmission and motor are serviced as an assembly.

Callout

Component Name

Preliminary Procedure
Air Inlet Grille Panel - Left Side - Remove - Air Inlet Grille Panel Replacement (Left Side)

Windshield Wiper System Module Bolt [4x]

CAUTION:

Tighten
8 N.m (71 lb in)

Windshield Wiper System Module

Procedure

NOTE:

The windshield wiper transmission and motor are serviced as an assembly.