Fastener Specifications
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Automatic Transmission Case Cover Seal |
| Automatic Transmission Fluid Filter |
| Automatic Transmission Fluid Filter Seal |
| Automatic Transmission Fluid Filter Seal [2x] - Fluid Pipe |
| Automatic Transmission Fluid Filter Seal - Housing |
| Control Valve Body Cover Gasket |
| Control Valve Body Gasket |
| Control Valve Body Gasket - Main |
| Clutch and Differential Housing Cover Gasket |
| Differential Carrier Cover Seal - Oil Tube |
| Differential Clutch Seal [4x] - O-Ring |
| Direct Clutch Spring |
| Main Shaft Plug |
| Rear Axle Shaft Seal - Left Side |
| Rear Axle Shaft Seal - Right Side |
| Transmission Fluid Filler Plug Seal |
| Transmission Fluid Pan Gasket |
| Transmission Oil Drain Plug Seal |
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|||
|---|---|---|---|
| Application | Quantity | Size | Specification |
| Metric (English) | |||
| Automatic Transmission Fluid Filter Bolt - Housing | 3 | M6 x 1.25 x 25 | First Pass: 4.1 N.m (36 lb in) |
| Final Pass: 100 Degrees |
|||
| Automatic Transmission Fluid Filter Cover Bolt | 4 | M5 x 0.8 x 20 | 6 N.m (53 lb in) |
| Automatic Transmission Fluid Pan Bolt | 13 | M6 x 1.0 x 16 | Automatic Transmission Fluid, Fluid Pan and/or Filter Replacement (with Pan Braces) , or Automatic Transmission Fluid, Fluid Pan and/or Filter Replacement (without Pan Braces) |
| Automatic Transmission Fluid Pan Bolt- Stud | 2 | M6 x 1.0 x 16 | Automatic Transmission Fluid, Fluid Pan and/or Filter Replacement (with Pan Braces) , or Automatic Transmission Fluid, Fluid Pan and/or Filter Replacement (without Pan Braces) |
| Automatic Transmission Fluid Pump Drive Gear Bolt | 1 | M5 x 0.8 | 6 N.m (53 lb in) |
| Control Valve Body Cover Bolt | 9 | M6 x 1.0 x 16 | Control Valve Body Cover Replacement |
| Control Valve Body Cover Stud- Stud | 1 | M6 x 1.0 x 16 | Control Valve Body Cover Replacement |
| Clutch Housing Bolt-Model Dependent | 14 or 16 | M8 x 1.25 x 25 | Clutch and Differential Housing Replacement (1st Design, Housing with All M8 Fasteners) , or Clutch and Differential Housing Replacement (2nd Design, Housing with Two M10 Fasteners) |
| Clutch Housing Bolt-Model Dependent | 2 | M10 x 1.5 x 35 | Clutch and Differential Housing Replacement (1st Design, Housing with All M8 Fasteners) , or Clutch and Differential Housing Replacement (2nd Design, Housing with Two M10 Fasteners) |
| Intermediate Clutch Spring Retainer | 1 | M8 x 1.25 | 25 N.m (18 lb ft) |
| Lubricant Fluid Pipe Bolt | 2 | M5 x 0.8 x 16 | 6.5 N.m (58 lb in) |
| Rear Axle Shaft Clip | 2 | - | - |
| Speed Sensor Bolt | 6 | M5 x 14 | Input Speed Sensor Replacement (Even) |
| Stator Shaft Support Bolt | 4 | M6 x 1 | 10 N.m (88 lb in) |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|||
|---|---|---|---|
| Application | Quantity | Size | Specification |
| Metric (English) | |||
| Automatic Transmission Case Cover Bolt | 3 | M5 x 12 | 6 N.m (53 lb in) |
| Automatic Transmission Fluid Filter Bolt | 2 | M5 x 0.8 x 25 | 6 N.m (53 lb in) |
| Automatic Transmission Fluid Filter Bolt | 2 | M5 x 0.8 x 16 | 6 N.m (53 lb in) |
| Automatic Transmission Manual Shift Auxiliary Position Switch Bolt | 2 | M4 T20 | 4 N.m (35 lb in) |
| Control Valve Body Bolt | 14 | M5 x 35 | Control Valve Body Replacement (Shift Activation) , or Control Valve Body Replacement (Main) |
| Control Valve Body Bolt | 3 | M5 x 50 | Control Valve Body Replacement (Shift Activation) , or Control Valve Body Replacement (Main) |
| Control Valve Body Bolt - Main | 12 | M5 x 45 | Control Valve Body Replacement (Shift Activation) , or Control Valve Body Replacement (Main) |
| Control Valve Body Bolt - Main | 7 | M5 x 35 | Control Valve Body Replacement (Shift Activation) , or Control Valve Body Replacement (Main) |
| Control Valve Body Bolt - Main | 2 | M5 x 23 | Control Valve Body Replacement (Shift Activation) , or Control Valve Body Replacement (Main) |
| Hose Clamp | 1 | - | - |
| Speed Sensor Bolt | 2 | M5 x 20 | Input Speed Sensor Replacement (Even) |
| Transmission Bolt | 3 | M10 x 1.5 x 56 | 53 N.m (43 lb ft) |
| Transmission Bolt | 4 | M10 x 1.5 x 40 | 53 N.m (43 lb ft) |
| Transmission Converter Cover Bolt | 2 | M8 x 1.25 x 22 | 9 N.m (80 lb in) |
| Transmission Control Module Bracket Bolt | 3 | M6 x 1 x 28 | 9 N.m (80 lb in) |
| Transmission Control Module Bolt | 4 | M4.2 x 1.4 x 20 | 2.5 N.m (22 lb in) |
| Transmission Heat Shield Bolt | 1 | M6 x 1 x 20 | 9 N.m (80 lb in) |
| Transmission Heat Shield Nut | 1 | M6 x 1 | 9 N.m (80 lb in) |
| Transmission Oil Drain Plug | 1 | - | 22 N.m (16 lb ft) |
| Transmission Oil Filler Plug | 1 | - | 25 N.m (18 lb ft) |
| Transmission Oil Filler Plug - Track Use | 1 | M14 x 1.5 | 12 N.m (9 lb ft) |