Installation Procedure

WARNING: This page is about a different car, the 2020 Chevrolet Bolt EV. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Drive Motor Power Inverter Module 3-Phase Cable (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Drive Motor Power Inverter Module 3-Phase Cable Bolt (4) - Tighten [3x] 9 N.m (80 lb in)
Drive Motor Power Inverter Module 3-Phase Cable Connector Cover Seal (3) - Install NEW
Drive Motor Power Inverter Module 3-Phase Cable Connector Cover (2) - Install
Drive Motor Power Inverter Module 3-Phase Cable Connector Cover Bolt (1) - Install [2x] 9 N.m (80 lb in)
Drive Motor Rear Mount Bracket - Install - Drive Motor Rear Mount Bracket Replacement
Enable the high voltage system. High Voltage Enabling