LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Traverse LS, 4WD >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Wheel And Column >> Repair Instructions >> Intermediate Steering Shaft Replacement >> Installation Procedure

Installation Procedure

  1. GM4286463Courtesy of GENERAL MOTORS COMPANY

    Position the intermediate steering shaft (1) in the vehicle.

  2. GM4286462Courtesy of GENERAL MOTORS COMPANY

    Intermediate Steering Shaft (2) @ Steering Gear - Install

    3. CAUTION:

    Refer to Fastener Caution .

  3. Intermediate Steering Shaft Lower Bolt (1) - Install and tighten 55 N.m (40 lb ft)
    1. Clean the threads of the bolt and mating threads with denatured alcohol or equivalent and allow to dry.
    2. Apply thread locking adhesive to the bolt. Adhesives, Fluids, Lubricants, and Sealers 
  4. GM4286461Courtesy of GENERAL MOTORS COMPANY

    Intermediate Steering Shaft (2) @ Steering Column - Install

  5. Intermediate Steering Shaft Upper Bolt (1) - Install and tighten 42 N.m (31 lb ft)
    1. Clean the threads of the bolt and mating threads with denatured alcohol or equivalent and allow to dry.
    2. Apply thread locking adhesive to the bolt. Adhesives, Fluids, Lubricants, and Sealers 
  6. Center the steering angle sensor. Steering Wheel Angle Sensor Centering
scientia non olet · About LEMON Manuals