LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Traverse L >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Vehicle Access System >> Diagnostic Information and Procedures >> Liftgate Ajar Indicator Malfunction (Without TB5) >> Circuit/System Verification

Circuit/System Verification

  1. Ignition - On/Vehicle - In Service Mode
  2. Operate the component: Close the liftgate.

    Verify the scan tool parameter: Rear Closure Ajar Switch = Inactive

    • If not the specified state 

      Refer to: Circuit/System Testing

    • Go to next step: If the specified state 
  3. Operate the component: Open the liftgate.

    Verify the scan tool parameter: Rear Closure Ajar Switch = Active

    • If not the specified state 

      Refer to: Circuit/System Testing

    • Go to next step: If the specified state 
  4. All OK.
scientia non olet · About LEMON Manuals