LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Suburban LS, 4WD, Gas >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Starting System And Charging System >> Repair Instructions >> Starter Shield Replacement >> Removal Procedure

Removal Procedure

    WARNING:

    Refer to Hot Exhaust System Warning

  1. Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection (Dual Battery) , or Battery Negative Cable Disconnection and Connection (Single Battery) 
  2. Raise and support the vehicle. Lifting and Jacking the Vehicle
  3. Remove the right front wheelhouse liner. Front Wheelhouse Liner Replacement - Right Side (Cadillac) , or Front Wheelhouse Liner Replacement - Right Side (Chevrolet) , or Front Wheelhouse Liner Replacement - Right Side (GMC)
  4. GM4957585Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution

    Battery Positive Cable Nut (1)@Starter Solenoid - Remove

  5. Generator Battery Control Wiring Harness (2) - Remove
  6. Electrical Connector (3) - Disconnect
  7. GM4957605Courtesy of GENERAL MOTORS COMPANY

    Starter Heat Shield Fastener (1) - Remove

  8. Starter Heat Shield Fastener (2) - Remove [2x]
  9. Starter Heat Shield (3) - Remove