Fastener Specifications
WARNING: This page is about a different car, the 2018 Chevrolet Sonic. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Non-Threaded Fasteners/Components
| Application |
|---|
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
| Front Wheel Bearing Assembly |
Single Use Threaded Fastener/Component Tightening Specifications
| Application | Specification |
|---|---|
| Metric (English) | |
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
| Front Lower Control Arm Front Bolt | |
|
115 N.m (85 lb ft) |
|
60 - 70 Degrees |
| Front Lower Control Arm Rear Nut | |
|
160 N.m (118 lb ft) |
|
30 - 45 Degrees |
Reusable Threaded Fastener Tightening Specifications
| Application | Specification |
|---|---|
| Metric (English) | |
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
| Front Stabilizer Shaft Bolt | 22 N.m (16 lb ft) |
| Front Stabilizer Shaft Link Nut | 65 N.m (48 lb ft) |
| Front Suspension Strut Mounting Plate Nut | 65 N.m (48 lb ft) |
| Front Suspension Strut Mount Nut | 65 N.m (48 lb ft) |
| Front Suspension Strut Nut | 110 N.m (81 lb ft) |
| Steering Knuckle Nut | |
|
42 N.m (31 lb ft) |
|
Loosen 120 Degrees |
|
35 N.m (26 lb ft) |
|
30 - 45 Degrees |