Fastener Specifications
REUSABLE THREADED FASTENER TIGHTENING SPECIFICATIONS
| Application | Specification |
|---|---|
| Metric (English) | |
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
| Battery Hold Down Retainer Reinforcement Bolt | 22N.m (16 lb ft) |
| Battery Negative Cable Fastener | 4.5N.m (40 lb in) |
| Battery Negative Cable Frame Ground Nut | 9N.m (80 lb in) |
| Battery Negative Cable Frame Ground Terminal Bolt | 22N.m (16 lb ft) |
| Battery Negative Cable to Chassis Frame Nut | 22N.m (16 lb ft) |
| Battery Negative Cable to Starter Stud | 25N.m (18 lb ft) |
| Battery Negative Post Clamp Nut | 9N.m (80 lb in) |
| Battery Positive Cable to Battery Positive Cable Junction Block Nut | 7N.m (62 lb in) |
| Battery Positive Cable to Generator nut | 18.5N.m (14 lb ft) |
| Battery Positive Cable to Starter Fastener | 12.5N.m (111 lb in) |
| Battery Positive Cable to Starter Solenoid Nut | 9N.m (80 lb in) |
| Battery Positive Cable to Underhood Fuse Block Nut | 7N.m (62 lb in) |
| Battery Positive Cable to Battery Positive Cable Extension Cable Junction Block Nut | 12N.m (106 lb in) |
| Battery Retainer Bolt | 22N.m (16 lb ft) |
| Battery Tray Bolt | 14N.m (124 lb in) |
| Body Harness Terminal Bolt | 9N.m (80 lb in) |
| Body Negative Cable Frame Ground Nut | 22N.m (16 lb ft) |
| Generator Mounting Fastener | 35N.m (26 lb ft) |
| Generator Pulley Nut | 90N.m (66 lb ft) |
| Intake Manifold Brace Mounting Bolt | 8N.m (71 lb in) |
| Positive Cable to Starter Fastener | 12.5N.m (111 lb in) |
| Starter Ground Cable Fastener | 12.5N.m (111 lb in) |
| Starter Mounting Bolt | 25N.m (18 lb ft) |