Fastener Specifications
REUSABLE THREADED FASTENER TIGHTENING SPECIFICATIONS
| Application | Specification |
|---|---|
| Metric (English) | |
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
| Driver or Passenger Seat Inner Recliner Finish Cover Fastener | 8 N.m (71 lb in) |
| Front Seat Armrest Mounting Bolt | 45 N.m (33 lb ft) |
| Front Seat Back Cushion Frame Bolt | 22 N.m (16 lb ft) |
| Front Seat Cushion Frame Bolt | 22 N.m (16 lb ft) |
| Front Seat Mounting Bolt | 40 N.m (30 lb ft) |
| Rear Seat Back Cushion Hinge Bolt | 43 N.m (32 lb ft) |
| Rear Seat Back Cushion Hinge Nut | 43 N.m (32 lb ft) |
| Rear Seat Back Outer Pivot Bolt | 23 N.m (17 lb ft) |
| Rear Seat Latch Fastener | 45 N.m (33 lb ft) |