LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Silverado 2500 HD Custom, 4D Pickup Extra Cab, 4WD >> Repair and Diagnosis >> General Information >> Reset Procedures >> Programming And Setup >> Repair Instructions >> K69 Transfer Case Control Module: Programming and Setup (NQH) >> Programming a New Control Module - Old Module Communicates

Programming a New Control Module - Old Module Communicates

  1. Ignition - On / Vehicle - In Service Mode
  2. Access SPS and follow the on-screen instructions for the control module:K69 Transfer Case Control Module
  3. Perform the SPS function:K69 Transfer Case Control Module - Prepare Control Module for Removal
  4. Replace the component:K69 Transfer Case Control Module
  5. Perform the SPS function:K69 Transfer Case Control Module - Programming
  6. Perform the SPS function:K69 Transfer Case Control Module - Setup

    Verify the Transfer Case Clutch Identifieris auto populated correctly, if incorrect enter the correct Transfer Case Clutch Identifier.

    Refer to:Transfer Case Identification

  7. Clear DTCs.
  8. Perform the scan tool function:Range Actuator Learn

    Refer to:Transfer Case Range Actuator Learn

scientia non olet · About LEMON Manuals