Installation Procedure
Trailer Brake Control Module (1) - Install
- Trailer Brake Power Control Module Bolt (2) - Install and tighten [2x] - Fastener Specifications
Electrical Connector (1) @Trailer Brake Control Module - Connect
- Install the spare tire.
- Remove the support and lower the vehicle.
- Connect the battery negative cable. Battery Negative Cable Disconnection and Connection (with KL9) , or Battery Negative Cable Disconnection and Connection (without KL9)
- Reprogram the trailer brake control module. Control Module References
CAUTION:
Refer to Fastener Caution .